DIAMOND CLEAR

DiamondFinish Clear Coat - Overview

Need a Clear Coat with a Flat or Satin Finish? Check out KBS MAXX Clear!

• Formulated to Apply Directly Over Other Coatings or Direct To Metal (DTM)!
• Permanent high solids (over 60%) and low VOC's Clear Coat.
• Ideal for Direct To Metal (DTM) applications - No Additives Needed!
• Apply directly to Painted Surfaces with Minimal Surface Prep.
• Incredibly tough and hard like no other clear coat on the market.
• Water clear high gloss clear coat remains permanently flexible and is able to perform in the toughest environments without yellowing, cracking or peeling.
• Can be applied with a brush (without leaving any brush marks), roller and conventional spray gun.
• Unlike normal two part coatings, no hardener is needed. You can just stir and go. DiamondFinish ClearCoat will cure without heat or UV lights in temperatures from 50° to 86° Fahrenheit.
• Can be applied directly to a cured Automotive basecoat, Standard solid color paints, and Single Part or Two Part paints. It can also be applied to Non Ferrous metals including Aluminum, Alloys, Brass, Chrome and Copper.
• Able to withstand the harshest of chemicals including fuels, solvents, Battery acid, Brake fluid, Ethanol, Methanol, MEK, Hydrochloric Acid, Fertilizers, and Acetone.
• Graffiti Resistant: because of its chemical resistance, grafitti just won't stick and can be removed simply with a solvent soaked rag.
• Great for high temperature automotive applications including the use on cylinder heads, engine blocks, brake components and even inlet manifolds, without yellowing up to 250° Fahrenheit.