#PML 9426 Dana 60/70 Rear, 10 Bolt

Volume: 0.8 qt. over stock

This Dana differential cover fits the rear end on applicable Dodge, Ford and GM trucks and vans. The ring gear varies with application (commonly 9.75 or 10.5 inches).

Some popular rear end applications for this Dana 60, 70 differential cover are:

• 1988-1993 Dodge Ram 250 & 350
• 1994-2002 Dodge Ram 2500 with automatic transmission
• Ford E250 & E350 vans 

This cover can be machined for a temperature sending unit. The hole for this goes in the face of the differential cover. So the temperature sending unit probe would be perpendicular to the face. This optional machining must be ordered over the phone. A plug is included for the hole is included.

Adjacent image shows a this Dana 60 cover that has been machined for 1/8 NPT.

In the image at the right, you can see the thick pad on the inside of the casting that allows for the the cover to be drilled and tapped in that area.

PML Differential Cover Compared to Stock

  
Click on image to view larger.

These images show this PML differential cover compared to the stock cover.

This image compares the depth of both PML Dana 60/70 rear differential covers and the stock cover. Click on image to view larger in a new tab or window.

For a larger picture, please click one of the above images. A separate window will open showing a bigger picture. (The larger pictures take a minute to display.)

PML Differential Cover Features:

• Increased oil capacity for cooler temperatures
• Sand-cast aluminum with raised fins
• 3/16-inch thick wall construction to add strength to differential housing
• 3/8-inch thick gasket flange will not bend when bolts are tightened
• Machined gasket surface for a secure seal using RTV or factory reusable gasket
• Oil changes without removing the cover
• All hardware provided, including magnetic drain plug